Trench Foot Treatment & Prevention

Written by

If you're planning to spend time outdoors this winter, you'll need to be cautious of frostbite and hypothermia due to the cold conditions. However, there's another more insidious medical problem to be watchful for: trench foot. Also known as immersion foot syndrome, trench foot is a harmful condition caused by prolonged exposure to damp, cold, and/or unsanitary conditions. If left untreated, it may cause loss of blood flow, numbness, open sores, fungal infection, and tissue decay (necrosis) which may force amputation of the foot or leg.

Photo of logs burning in a campfire.

You might be thinking, “trench foot only happens to soldiers living in cold muddy trenches, right?” While the name of the condition originated in World War I as a result of those conditions, it's not restricted to winter. The related condition of tropical immersion foot (or “paddy foot”) afflicted many soldiers during the Vietnam war, despite temperatures of 70°F and up. Trench foot is also not restricted to wartime environments, and frequently affects hikers, mountain climbers, and backpackers. It has even affected attendees of a particularly rainy music festival.

Here's an interesting 5-minute documentary segment from the BBC, which briefly addresses the initial causes of and solutions to trench foot during World War I:

British physician and bacteriologist Almroth Wright made tremendous progress in trench foot treatment by cleaning the wounds thoroughly, then leaving them open to the air to heal naturally. This contradicted the older practice of pouring antiseptic into the infected wound, and immediately closing or covering it. The key cause of trench foot is excessive moisture, so allowing the feet to breathe and dry out was a game-changer at that time.

Black and white photo of Almroth Wright. Wright advanced treatment of trench foot by allowing patients' feet to breathe and dry.

Almroth Wright advanced treatment of trench foot by allowing patients' feet to breathe and dry.

In modern times, we have a better understanding of trench foot. Since it begins as a result of prolonged exposure to moisture, and is accelerated by cold temperatures and bacteria/fungi, the best preventative measure is to keep feet dry, warm, and clean. In heavy rain or snow, this can be difficult, but regular foot inspection is essential to watch for initial symptoms — numbness, tingling, swelling, and pain. Even waterproof boots aren't a sure fire fix — while they can keep out external moisture, they may also trap in sweat, leading to maceration and softening of the skin.

Trench foot boot immersion medical water 2

The introduction of wooden “duckboards” helped keep soldiers' feet out of the mud and moisture during...

If these initial symptoms are spotted, the Centers for Disease Control and Prevention (CDC) recommends trench foot treatment via applying warm packs or soaking in warm water (102° to 110° F) for approximately 5 minutes. Medical attention should be sought if symptoms continue to worsen.

Trench foot boot immersion medical mud 3

The effects of trench foot on an unidentified soldier during WWI. Source: Library and Archives Canada, PA-149311 /...

Even if no symptoms are present, the following preventative measures should always be taken if you're spending time in a wet environment:

  • Thoroughly clean and dry feet at least once per day, or multiple times throughout the day if possible.
  • Put on clean, dry socks daily. If no fresh socks are available, air-dry your existing socks or place them near a fire to dry.
  • Do not wear socks when sleeping or resting. Allow your feet to breathe and dry out. However, keep them warm and be cautious of frostbite.

For more information on trench foot treatment and prevention, read the CDC Disaster Recovery Fact Sheet on trench foot or immersion foot.

Related Posts

 

Zombie Tools Limited-Edition Bushlicker Knife

Written by

With a name like Zombie Tools, you might expect this Montana-based team of bladesmiths crafts weapons that look cool but are impractical for survival use. Fortunately, that's not the case — Zombie Tools blades may look good, but they can also take a beating in the real world. The company has continued to prove this point by unveiling knives that emphasize practicality, while retaining the unique battle-worn ZT aesthetic.

The Zombie Tools elves are hard at work finishing a backlog of blade orders before Christmas.

The Zombie Tools elves are hard at work finishing a backlog of blade orders before Christmas.

A few weeks ago, we wrote about the redesigned Zombie Tools Para Bellum, a slight twist on the traditional Filipino bolo knife. More recently, ZT has announced the release of another practical blade, known as the Bushlicker. The innuendo-laced name fits right in alongside other creatively-dubbed ZT blades like the Traumahawk and D'Capitan. However, the Bushlicker is substantially different from most previous ZT blades in a number of key areas.

Zombie tools bushlicker bushcraft knife 1

The Bushlicker is ZT's very first bushcraft knife, designed with a simple and useful blade size and profile. The short, upswept belly is ideal for carving wood and skinning game, while the hard-edged spine serves as a ferro rod striker. Rather than ZT's typical leather-wrapped aluminum handle scales, this knife uses black G10 laminated onto a red Kydex liner on each side of the full-tang handle.

Zombie tools bushlicker bushcraft knife 2

Speaking of materials, there's another first for ZT: a departure from 5160/6150 spring steel. All previous ZT blades have been made of these forms of steel, but the Bushlicker is different. This little blade uses German 80CRV2, which in ZT's words is “tough as f**k” and “will outlive you”. The blade can be carried into the wilderness in its included black leather sheath, which is embossed with the ZT logo. Here are the rest of the key specs:

  • Total Length: 8.5 inches
  • Blade Length: 4.25 inches
  • Handle Length: 4.25 inches
  • Steel Width: 0.165 inches
  • Weight: 8 ounces
  • MSRP: $275

Zombie tools bushlicker bushcraft knife 3

Finally, the ZT Bushlicker knife is the company's first limited-edition blade. Only a few dozen have been produced for release this holiday season, and the knife will only be available for purchase while this supply lasts. Once they're gone, the Bushlicker will be no more. The upside is that unlike standard-production ZT blades, these are not being made-to-order, and are therefore ready to ship immediately. So, you can still pick one up before Christmas.

For more info on the Zombie Tools Bushlicker bushcraft knife, go to ZombieTools.net.

Understanding Ferrocerium: What It Is & How it Works

Written by

Ferrocerium — it's a word that sounds like it should describe the contents of a pill bottle from the drug store, rather than a tool in your survival kit. Adding to this confusion, ferrocerium rods or “ferro rods” are referred to and associated with a myriad of other terms: fire steel, metal match, magnesium rod, mischmetal, Auermetall, flint, or artificial/man-made flint. A quick search on Amazon.com reveals products with various combinations of these names.

So, what the heck is ferrocerium, and how does it work?

Ferrocerium ferro rod fire starter flint magnesium 1

Baron Carl Auer von Welsbach, inventor of ferrocerium. Source: Wikipedia

The substance now called ferrocerium was invented in 1903 by Austrian scientist Baron Carl Auer von Welsbach, pictured above. Welsbach was experimenting with types of mischmetal — that is, combinations of rare earth elements, such as cerium, lanthanum, and neodymium. Cerium was especially notable for its low ignition temperature.

Ferrocerium ferro rod fire starter flint magnesium 3

Cerium is a rare earth metal that is an essential element of ferrocerium. Source: Wikipedia / images-of-elements.com

When Welsbach mixed a combination of 70% cerium and 30% iron, he noticed the resulting alloy gave off sparks when scratched. When ferrocerium is struck by a hard and sharp object, such as a carbon steel blade, tiny shavings are oxidized and ignited by the friction of the striker and burn at 3,000°C/5,430°F.

Chemistry students may remember that iron compounds use the prefix ferro due to iron's Latin name ferrum. Therefore, this new iron-cerium alloy was called ferrocerium. Some European countries still call the material Auermetall after the baron's first name.

Modern ferrocerium typically appears as a cylindrical metal rod.

Modern ferrocerium typically appears as a dark-colored metal rod.

Later on, Welsbach added other metals to ferrocerium in order to fine-tune its properties. Lanthanum created brighter sparks, and other metals made the alloy harder and more durable. Since then, material scientists have continued to modify the recipe, producing a substance with the following approximate makeup:

  • 30% Iron
  • 35-50% Cerium
  • 25% Lanthanum
  • Small amounts of neodymium, praseodymium, and magnesium
Ferrocerium ferro rod fire starter flint magnesium 4

The DGT Shadrach knife contains a mini ferrocerium rod. See Issue 17 for a full review.

Notice that ferrocerium contains magnesium. However, it's inaccurate to call the alloy a “magnesium fire starter” due to the extremely small amounts it contains (about 2%). Actual magnesium bar fire starters contain a large block of pure magnesium, which can be shaved and ignited with a ferro rod.

This magnesium bar contains an embedded ferro rod, but the rest of the bar is pure magnesium.

This magnesium bar has an embedded ferro rod, but the rest of the bar is pure magnesium tinder material.

It's also technically inaccurate to call ferrocerium “flint” because it has no chemical relationship with the rock/mineral of the same name. However, since both ferro rods and flint rocks spark when struck against steel, ferrocerium is often called flint or artificial flint. The “flint” insert in a Zippo lighter, for example, is just a tiny piece of ferrocerium.

Flint and other hard minerals can be used to create sparks, but are unrelated to ferrocerium.

Flint, chert, quartz, and other hard minerals can be used to create sparks, but are unrelated to ferrocerium.

Not even the name “fire steel” is technically accurate, since ferrocerium contains no carbon steel, only iron or iron oxide. “Fire iron” would be a more appropriate name, but doesn't quite have the same ring to it.

No matter what you call it, ferrocerium is an excellent tool for fire-starting in survival situations. This time-tested alloy generates showers of white hot sparks on demand, and is worthy of a place in just about any survival kit.

Infographic: Flowchart of Dangerous Viruses

Written by

To the average person, viruses may seem confusing and overwhelming. Unless you've studied medicine or virology, it's hard to explain the technical differences between a common cold and the flu, much less hantavirus and encephalitis. However, understanding the relationships between viruses can help us remember their symptoms, as well as how they're transmitted. This allows us to better prepare for everything from mundane sickness to major viral outbreaks.

An electron micrograph of the varicella zoster virus (VZV) known as chickenpox. Source: Wikipedia / CDC

An electron micrograph of the varicella zoster virus (VZV) known as chickenpox. Source: Wikipedia / CDC

We'll introduce this concept with some approachable examples. Chickenpox and shingles are both forms of herpesvirus, specifically the sub-category varicella zoster virus (VZV). VZV is highly contagious among humans, but it can be prevented through vaccination.

Many viruses in the flavi family are transmitted by mosquitoes.

Many viruses in the flavi family are transmitted by mosquitoes.

Zika, west nile, dengue, and yellow fever are all forms of the flavi virus. All of these are considered arboviruses, meaning they are transmitted via insects, specifically Aedes mosquitoes. Flavi viruses also tend to cause moderate to severe fever — so, if you were bitten by a mosquito and are experiencing this symptom, you should know to seek medical attention. You don't need to comprehend the genetic structure of viruses to understand these relationships.

Virus disease flowchart medical first aid infographic 4

The graphic above was created by Mikael Haggstrom for the WikiJournal of Medicine and shows the body parts affected by some of the most notable viruses. For an in-depth look at the families of dangerous viruses, check out the infographic below from Eleanor Lutz of Nerdcore Medical. Note the arbovirus insect symbol, as it shows which viruses can be transmitted by mosquitoes, flies, and ticks. The syringe symbol indicates viruses which can be prevented through early vaccination.

For a much larger full-size version of this infographic, click here.

Virus disease flowchart medical first aid infographic 3

Even with all the information above, there's a whole host of other diseases caused by bacteria instead of viruses. For more information on the difference between a virus and a bacterial infection, go to the CDC page “Viruses or Bacteria – What's got you sick?”

The Origin of “Thugs”

Written by

Ever wonder where the words we use came from? The English language is an amalgamation of words from many languages and cultures, and these terms are often generated by memorable events over the course of centuries. The history behind specific words is known as etymology, and it can provide valuable insight into their true meaning. For example, the word “jumbo” came to mean “very big” because it was the name of an extra-large elephant owned by P.T. Barnum in the 1800s. We may think we know the meaning of jumbo, but not realize that it implies something as large as a 6.5-ton elephant.

The modern word

The modern word “thug” originated from the Hindi language spoken in India.

As survivalists, we may use the term “thugs” to describe marauding criminals who may steal our resources during a disaster scenario. However, understanding the etymology of this word provides some much-needed context on what thugs really are — in fact, it's even worse than our modern interpretation.

The word “thug” is derived from a word ठग्गी in the Hindi language of India. This word is pronounced as “thuggee” in English, and it is derived from another Hindi word: “thag” which means deceiver or swindler. Historically, Thugs were an organized criminal gang that thrived in India from the mid-1300s to the late 1800s. Their brutally-violent actions built a reputation over the course of these 450 years, and eventually made their name synonymous with criminality.

Thuggee criminal gang India murders 2

Three Thug gang members restrain and strangle a sleeping traveler. Source: Wikipedia / Columbia University

Membership in the Thug gang was typically passed down from father to son, creating a actual class of trained criminals. There was also a religious element to thuggery, as the Thugs considered themselves servants of Kali, a scimitar-wielding Hindu goddess associated with destruction and renewal. Movie fans may remember references to the Thuggee and goddess Kali in Indiana Jones and the Temple of Doom, though this film's depiction was heavily fictionalized.

Thuggee criminal gang India murders 4

A sketch of a 90-year-old Thug in jail, circa 1840. Source: Wikipedia / The British Library

Historical accounts tell us that Thug gang members would target isolated travelers, and blend in with their group to seem non-threatening. Then, when the targeted individual was asleep or alone, the Thugs would silently strangle their victim with a handkerchief or rope noose. Any valuables would be stolen, and the body would be disposed of quickly. The Guinness Book of World Records estimates that Thugs caused as many as two million deaths through these methods.

Thuggee criminal gang India murders 3

Thugs stabbing the eyes of murdered travelers before throwing their bodies into a well. Source: Wikipedia / The British...

As survivalists, we should remember the history behind the term “thug”, and realize that criminals who prey on travelers are not a new phenomenon. Although the Thuggee gang is no longer in existence, we should always be aware of our surroundings, prepare to defend ourselves, and avoid falling victim to modern-day thuggery.

Easy DIY Snowshoes from Saplings

Written by

In the words of Ned Stark, winter is coming. Actually, depending on where you live, the cold months may have already arrived. With the cold often comes a thick blanket of snow. If you're a dedicated survivalist, you should prepare yourself for traversing this snow safely. That means wearing warm clothing, carrying fire-starting tools, knowing how to construct a winter shelter. However, you're not going to accomplish much if you can't even make it 10 steps into the woods due to waist-deep snow.

Without snowshoes, you're going to have a hard time making progress in winter environments.

Snowshoes are a key asset for winter environments, but it's not always as simple as buying a pair at your local sporting goods store. There are many instances when off-the-shelf snowshoes can't be used. For example, your car may break down in the middle of nowhere, or one of your snowshoes could be damaged or lost. Maybe in your rush to bug out, you simply didn't have time to grab them. Whatever the case, it's advantageous to know how to build a pair of DIY snowshoes from found materials.

DIY snowshoes winter boots paracord 1

Lonnie shows off the framework of his DIY snowshoe.

In the following video from Far North Bushcraft and Survival, host Lonnie shows how to build simple snowshoes from some alder saplings and spruce boughs. The outer section is composed of two curved saplings or branches, tied at each end with nylon rope or paracord. Lonnie recommends building the snowshoes at least chest-high for adequate surface area. Two boot supports are lashed to the center, and saplings are pulled through underneath.

We were definitely wondering how much of a difference the snowshoes were actually making, so we appreciated the humorous demonstration at the end of the video. Given this side-by-side comparison, we'd say this snowshoe design is a resounding success.

Go Bag Loadout: Alex Wander of Wander Tactical

Written by

We first met Alex Wander at Blade Show earlier this year, and he immediately got our attention with some very cool knife designs from his company, Wander Tactical. After talking with him some more, we realized that he's not only a bladesmith, he's also an avid outdoorsman and a survivalist — our kind of guy. When he's not working on knives with his brother Greymoose Dino, Alex is practicing his bushcraft skills in the backwoods of his home country, Italy.

Alex recently shared a photo of his personal go bag with us, and his loadout provides some insight into the no-frills survival philosophy he emphasizes.

Wander Tactical go bag loadout gear 2

Here's a list of the items in Alex's go bag loadout:

  • Vacuum-packed meals and energy bars, approx. 3,000 calories total
  • Typhoo tea bags
  • 2 Lansky diamond sharpening stones (medium and fine grit)
  • Fenix E35 flashlight with paracord lanyard
  • 5 Lithium 18650 flashlight batteries
  • Large ferrocerium rod fire-starter
  • Waterproof match container with stormproof matches
  • Mint tin with fatwood tinder shavings
  • Recta DP 6G compass with luminous markings
  • 550 paracord
  • Helikon-Tex poncho/tarp with stuff sack
Here's a photo of a Wander Tactical Smilodon next to Alex's pre-production Wander Tactical Freedom knife (bottom).

A Wander Tactical Smilodon (top) next to Alex's new Freedom knife (bottom). Photo: Alex Wander/Facebook

  • Wander Tactical Freedom knife (pre-production prototype)
  • Rite in the Rain waterproof notebook
  • Brass snare wire
  • Fishing kit with hooks, sinkers, and reel of line
  • First-aid kit with 2 Israeli bandages, Celox hemostatic granules, tourniquet, bandages, and iodine disinfectant (also used as a water purifier)
  • Locking carabiner
  • Not pictured: Klean Kanteen stainless steel water bottle, GSI Outdoors stainless steel cup, shemagh scarf

Wander Tactical go bag loadout gear 5

These items are contained in an old Flyye Industries handheld pack, with a shoulder strap, PALS webbing, and carabiner. In a SHTF situation, Alex would be able to grab the bag and be out the door and into the woods in no time. This lightweight wilderness survival kit gives Alex quick mobility, without the weight and bulk of a full-size 30-pound bug-out bag.

The tarp makes for an excellent improvised lean-to shelter.

The tarp and paracord allow construction of an improvised lean-to shelter. Photo: Alex Wander/Facebook

Unsurprisingly, of all his tools, this knife-maker values his knife the most. He wrote, “In 25 years I’ve tried tons of knives and now I have my own idea about how a knife should be. I always spend my weekends in the wilderness, and sometimes more than a weekend, learning primitive survival skills and so on. I’ve been also in a lot of places around the world even for months, and your loyal companion will always be your tool: a knife.”

Alex learned his knife-making skills from his brother and business partner at Wander Tactical, Greymoose Dino. He taught Alex how to grind his first blade, and they have now built a successful company together. To see more of Alex and Greymoose's latest blade designs, follow @wandertactical_cutting_tools on Instagram or visit WanderTactical.com.

Infographic: Pistol Shooting Fundamentals

Written by

Every survivalist should know how to shoot, and hit targets consistently with a variety of weapons. This skill set is invaluable for both hunting and self-defense, but it takes serious practice. Whether you're an expert shooter or a complete newbie, understanding and maintaining your technique is the key to shooting accurately.

bug-out-kayaks-handguns

In survival or emergency situations, you may need to train a new or inexperienced shooter on the absolute basics. During those circumstances, an illustrated guide can help the individual visualize some parts of the technique before they ever handle a gun. The following infographic was created by the NRA to show pistol shooting fundamentals — you may find it useful for friends or family members who are learning how to shoot for the first time.

Of course, like most infographics, this graphic leaves out certain important elements for the sake of brevity. There's no primer on the essential safety rules to know before ever handling a gun, nor is there any reference to grip technique or body stance. Despite the obvious need for additional information, the infographic does provide a good head start on aiming and shooting a pistol accurately.

Shooting fundamentals pistol gun infographic 1

Shooting fundamentals pistol gun infographic 2

Shooting fundamentals pistol gun infographic 3

Shooting fundamentals pistol gun infographic 4

Shooting fundamentals pistol gun infographic 5

So, consider showing this Pistol Shooting Fundamentals graphic to a new shooter you know. Though much of this information may seem obvious to those of us who've been shooting for years, you might be surprised to hear how much new shooters can benefit from it.

Superesse Straps EDC Handkerchiefs

Written by

The concept of carrying a handkerchief every day may seem a bit old-fashioned. After all, if you need to sneeze or dab away a stain these days, most homes and businesses have disposable tissues. However, a handkerchief can be much more than a simple square of fabric. In fact, Superesse Straps, a company famous for its paracord survival bracelets, has developed a new line of “survival and tactical” handkerchiefs.

Superesse Straps survival EDC handkerchiefs 2

Before you go scoffing at the idea of a high-tech handkerchief, keep reading. These “hanks” offer various added features that can be helpful for everyday carry purposes, or even in survival scenarios. Of course, they can always be used for the traditional purposes: wiping spills, drying sweat on your brow, or covering your face while you sneeze. However, you may be surprised by the additional capabilities.

Superesse Straps offers seven different types of EDC handkerchiefs:

Superesse Straps survival EDC handkerchiefs 3

The Faraday Hank blocks electromagnetic radiation and RFID signals.

Faraday Hank – Sewn-in nickel and copper EMF shield material to block RFID chip readers and electromagnetic pulses. Ideal for wrapping your credit cards, cell phone, and other electronics. MSRP: $40

Camp Rag – Two-layer Kevlar cloth with aramid thread and brass grommet. Burnproof and flame resistant up to 8,000 degrees Fahrenheit. Ideal for grabbing hot equipment or shielding items from flames. MSRP: $40

Superesse Straps survival EDC handkerchiefs 6

Saw Shemagh –  Soft woven handkerchief with hidden kevlar aramid saw thread. Saw is secured by a flap, resistant to heat, and offers 200-pound breaking strength. MSRP: $40

Tactical Tissue – Ripstop material with morale patch mounting point and hideaway storage compartment. Optional Urban Kit version includes a hidden non-metallic handcuff key and kevlar thread saw for escaping illegal restraints. MSRP: $40 for standard version, $50 with Urban Kit option

Superesse Straps survival EDC handkerchiefs 5

The Superesse Straps Filter Bandana incorporates a carbon fiber water filter.

Filter Bandana – Three-layer handkerchief with porous 4″x4″ carbon fiber filter sewn into the center. Superesse Straps says the filter can be activated by flame to remove particulate and contaminants from water, or it can be used as an improvised face shield/gas mask. MSRP: $40

Char Cloth – Features two forms of built-in fire tinder. Wax-coated tinder wick is stored in a hidden pocket, and a square of burnable char cloth is also included. MSRP: $40

The Char Cloth features built-in fire tinder materials.

The Camp Rag features flame-resistant fabric for gripping hot items.

EDC Hank – Standard double-layer heavy-duty handkerchief. Optional Survival Kit version adds supplies hidden in a waterproof corner pocket: fish hook, fire tinder, two matches, paracord, water purification tablet, and safety pin. MSRP: $25 for standard version, $40 with Survival Kit option

These handkerchiefs are currently available for pre-orders through Superesse Straps. For more info on other Superesse Straps products, check out SuperesseStraps.com.

Think Before You Drink: Survival Uses for Alcohol

Written by

Red wine and a perfectly-seasoned steak, scotch and a cigar, a few close friends and a round of cold beers. Alcohol pairs well with many things in life, but does it really pair well with survival scenarios? Unless you plan to get liquored-up and forget your troubles as society crumbles around you, drinking it during an emergency shouldn't be your first thought.

In the 411 column titled “Drinking Contest” in Issue 17 of our printed magazine, John Schwartze addresses the realities of alcohol consumption in a survival situation. While alcohol can cause you to feel less thirsty, warmer, and more relaxed, it also masks your perception of the real effects it's having on your body: dehydration, decreased core temperature, and loss of coordination. These effects may not be dangerous if you're sitting on the couch at home, but they're catastrophic in a survival situation when wise choices and quick reflexes are essential.

Here's a preview of

Here's a preview of our “Drinking Contest” infographic from Issue 17, on shelves on December 2nd,...

Now hold on — don't go pouring all the booze down the drain when disaster strikes. There are many alternative survival uses for alcohol that make this substance an extremely valuable commodity. Even if you're not ingesting it, booze can aid your survival efforts in a variety of ways. In order to help you consider these alternate uses, we've compiled a list of a few of our favorites.

1. Bartering Tool

Survival uses for alcohol beer wine liquor 8

While you may understand that drinking your sorrows away during an emergency is a bad idea, there are many others who will certainly not hesitate to do so. Also, good alcohol is time- and labor-intensive to produce, and breweries, distilleries, and wineries will almost assuredly cease production after a disaster. This means that even if paper money becomes useless as a commodity, alcohol is going to become rarer and more valuable as time passes. If you've got a stockpile of top-shelf booze, you can trade some for other items you may need.

2. Medical Disinfectant

If you've ever felt the sting of rubbing alcohol on a cut or scrape, you'll know that highly-concentrated alcohol kills germs. However, don't go thinking that you can simply pour some light beer on your wound — you'll want the strongest stuff you can find. Isopropyl “rubbing alcohol” is typically at least 70% alcohol by volume (ABV), so look for something approaching that figure. For reference, “100 proof” alcohol contains 50% ABV, so you'd ideally want to find 140 proof (70% ABV) or higher for disinfection purposes. Cheap grain alcohol like Everclear (190-proof or 95% ABV), whiskey, or moonshine can be very effective as a disinfectant.

3. Anesthetic/Sedative

Like your dentist says, daily brushing is necessary to keep your pearly whites clean.

In the days before aspirin and other pain pills were commonplace, alcohol was often used as a rudimentary painkiller and/or sedative. However, it shouldn't be used in large quantities or for serious medical issues — “the large doses of alcohol needed to produce stupefaction are likely to cause nausea, vomiting and death instead of sleep.” A glass of alcohol can keep your mind off minor muscle aches and pains, or it can be used as a numbing mouthwash to temporarily dull a toothache. (If tooth pain persists, see a dentist. If no dentist is available, you may need to deal with the problem yourself.)

Alcohol also works well as a flexible ice pack. Just pour some vodka in a sealable plastic bag, and place it in the freezer — the alcohol will prevent the bag from freezing solid.

4. Household Cleaner

Survival uses for alcohol beer wine liquor 11

Alcohol makes for a good cleaner and degreaser around the home. Cheap vodka can be used to clean glass, polish chrome, kill mold, and deodorize clothing or shoes. As we mentioned above, high-proof alcohol also kills bacteria, so it can be used to wipe down surfaces if no other cleaners are available.

5. Solvent/Degreaser

Tools for Survival - Ratchet

Oily and sticky substances can be naturally dissolved by alcohol. This is why denatured alcohol and rubbing alcohol are often used to remove paint, adhesive residue, and grease from surfaces. Drinkable ethanol alcohol can be used for similar purposes, though it may not be as effective due to its higher water content. If you use your booze to clean a metal object, like a firearm, bicycle, or tool, be sure to dry and oil it thoroughly afterward to displace residual water that might otherwise lead to rust.

Also, since poison ivy and poison oak cause rashes by leaving an invisible oil on your skin, scrubbing your skin with alcohol can prevent these rashes.

6. Pest Control

All sorts of annoying pests are attracted to the scent of beer, so it works well as bait in traps. If you have a cockroach problem, a piece of bread soaked in beer can be placed into a Vaseline-lined container. Roaches will go to the beer, but won't be able to climb back out. Snails and slugs in your garden will also be attracted to beer.

7. Cooking

joining-a-survival-group-food-004

Booze has many uses in the kitchen. If you're feeling fancy, you can use it in a sauce or marinade for meat, add flavor to a dessert recipe, or even flambé your dish (carefully). Alcohol is also great for making natural flavor extracts, which you can add to other recipes in the future. Vanilla, lemon, orange, mint, and other flavors can be captured by soaking in alcohol for 5-6 weeks.

8. Fuel and Fire

Fire safety

Aside from being used in food, alcohol serves as a heat source for cooking and boiling water. Check out our previous article about how to make an ultralight alcohol stove. Alternatively, an alcohol lamp can be used for lighting or sterilizing tools. A quick spritz of high-proof alcohol can help you get your campfire going, too.

In a worst-case home-defense scenario, you can even add a rag to a bottle and make a Molotov cocktail. Just don't burn your house down in the process.

9. Raw Materials

Survival uses for alcohol beer wine liquor 5

Even when all the booze is dried up and you run out of survival uses for alcohol, the containers can be re-purposed. Glass bottles can be cut into cups or glasses, and plastic bottles can be turned into cordage. Wine corks can be sliced up and formed into a cork board, or can be ground up finely and used as moisture-retaining mulch for your garden's soil.